(909) 784-6305 sales@ktptechs.com

King Epoxy Emblem Co., Ltd » Metal Stamping

Metal Stamping

About Metal Stamping

Stamping is the process of placing flat sheet metal into a stamping press where a tool and die surface forms the metal into a shape. This could be a single stage operation where every stroke of the press produces the desired form on the sheet metal part, or could occur through a series of stages. The process is usually carried out on sheet metal. Our capabilities are shown below:

Progressive Stamping

Suitable for massive products
Mechanical press from 80-600Ton.
Raw material thickness from 0.1-6mm
Maximum tool size size:2700mm*1200mm

Progressive Stamping

Suitable for lower volume or multiple stamping process products
32 units of 63-400Ton Press

Post Process and sub-assembly

One stop shop from stamping to sub-assembly
Multiple second process capabilities
  1. Degrease
  2. Tapping
  3. Riveting
  4. Machining
  5. Spot Welding
  6. Gas Shield Arc Welding
  7. Sub-assembly

Our Strength in Tools

Stamping die
Automotive part inspection gauge
Precision tools fabrication
Non standard fixture
100% tooling design and fabrication in House
Design teams focus on tools of automotive and consume industry
High-class tools manufacturing facilities

Quality Assurance

Sets of CMM machines with profile scanning function.
Digital projector
Mitutoyo surface roughness and profile tolerance measurement equipment
Rockwell hardness tester, Vivtorinox
Salt spray test machine